-
Fixing device or rail clamps and multi-brackets, Ø18 mm hole.
Minimum quantity for sale: 2 pcs.
Please check the lamp shaft diameter; it is typically one of the three listed below.
Accessories separately purchased
Handles purchased separately: (JB 94-00-00)
The sizes of the plastic bushings were purchased separately.
JB 128-00-09 (Ø9.6 mm.)
JB 128-00-01 (Ø13 mm.)
JB 127-00-01 (Ø16 mm.)
External specifications:
Height: 61.5 mm.
Width: 36 mm.
Depth: 35.6 mm.
Weight: 171 grams.
Hole: Ø1 mm. (Without bushing)
Material: Aluminium
Country of origin: Denmark
HS Code: 76042990
Brand: JB-Medico
JB 205-00-18 is assembled with a claw used for
1. IV-Pole on bedside wall pane
2. Flat-screen ar
3. Medical equipment
4. Medical light
5. Column tube/rods
Medical Rail Clamps, Sliding Clamps Medical rail clamps:
For attaching hospital equipment, medical rail clamps secure the equipment rail to the wall or bedside panel.
Durability, hygiene, and rail-mounted.
JB-Medico makes a difference in the design and advice of hygienic suspension solutions for:
Healthcare, food and pharmaceutical industry.
Hospitals, medical centres, chiropractors and dentists.
Physiotherapists, schools and laboratories.
JB-Medico adapts solutions to meet the needs of all clinical departments.
Fixing device for rail clamps and multi brackets, Ø18 mm hole.
Rail Clamp, a wide model with one ball clasp and three pcs. Countersunk Ø6,6 mm. Holes. |
|
|
Pom bushings, hole size Ø16 mm |
|
|
Pom bushings, hole size Ø9.6 mm. |
|
|
Rail Clamp, wide model, locked using two socket screws with three pcs. countersunk Ø6,6mm holes. "Prepared for suspension.” |
|
|
Pom bushings, hole size Ø13 mm. |
|
|
Rail Clamp, a wide model with a two-ball clasp and three pcs. countersunk Ø6,6 mm. holes. |
|
|
Stainless adjustable handle M6X20 mm. |
|
|
Slide clamp half model, locked with one ball clasp. Countersunk Ø6,6mm holes. |
|
|
Rail Clamp, half model, locked with two socket screws. Locks with two pin screws. |
|
|
Rail Clamp, wide model, locked with one ball lock. Three pcs. Countersunk holes Ø6,6 mm. |
|
|
Rail Clamp, wide model, locked using two socket screws. Three pcs. countersunk holes Ø 6,6 mm. |
|
|
Rail Clamp, wide model, locked with two ball locks and three pcs. Countersunk holes Ø 6,6 mm. |
|
|
Multibracket with 2XØ6 clearance holes, fits from 16-41 mm. |
|
You might also like
Fixing device, slide clamps & multi-brackets, Ø25 mm. hole
GCX-rail bracket with FIXING DEVICE, Ø18 mm. bushing hole, JB 820-625-18
Multibracket with a fixing device, Ø18 mm. hole
Rail Clamp, half model, locked using two socket screws with fixing device, Ø18 mm. hole
Rail Clamp, wide model with one-ball clasp and fixing device, Ø18 mm. hole
Rail Clamp, wide model with one-ball clasp and fixing device, Ø18 mm. hole
Rail Clamp, wide model, locked using two socket screws, Ø18 mm hole.
Rail Clamp, wide model, locked using two socket screws, Ø18 mm. hole.
Slide clamp for medical lamps with ball clasp and Ø18 mm hole
Slide clamp half model, locked using one ball claps, Ø18 mm hole
Slide clamp, a wide model with a two-ball clasp with fixing device, Ø18 mm. hole
Slide clamp, a wide model with a two-ball clasp with fixing device, Ø18 mm. hole.
16 other products in the same category:
Telescopic pole, 940X20 mm, fits, e.g. rail clamps, in stainless steel
Suction cup 330 ml conical in stainless steel AISI 304
Storage box in stainless steal with T-track bracket
Sliding fittings in aluminium, lockable to T-track equipment rail
Record folder tray, stainless steel, AISI 304
Catheter holder 400 mm, guide for T-track brackets, stainless steel
Spacer to two types of wall rails, length 18 mm.
Hand Sanitizer Dispenser, 10 cm arm with drip tray & bracket – Stainless Steel
Catheter container, Wire basket 6,6 Litre, hook for T-slot, Stainless Steel
Oxygen & Gas cylinder holder, Top, Ø140 mm. hole, Stainless Steel
Oxygen & Gas cylinder holder, Top, Ø117 mm. hole, Stainless steel
Dispenser for square and round bottles in stainless steel (AISI 304)
Record folder tray, stainless steel, AISI 304, JB 98-00-00
Dansk
English
Español
